The Kohler serial number is circa 2010 if I read their chart correctly.
If the rest of the machine is solid I'd repair it but for that rough terrain area I'd buy whatever attachments were appropriate and use the tractor, it'll last longer!
Bought 2 Timberwolf 24' conveyors less engines - installed 2 Tecumseh 10hp snow engines because I had them.
Before trying to fabricate something wondering if any of you had maybe found lawn mower parts that would retrofit the snow engines for the air cleaner?
I just acquired a 2014 LTX 1040 that was the target of a large tree. All front body parts smashed, bent the front axle kingpins and more.
Any chance someone has one maybe with a blown engine but good body parts? It may make more sense to part this one out.
Lukesin, your awesome dual setup made me want one so I made this - I lack your fabrication talents so I used two drawbars I had to make this one. I know it protrudes a bit more than normal, but both the splitter & trailer have very low tongue weight. It also allows a wide turn angle.
Thanks for...
Improvised - 6" engine to pump mount
Could not find what I needed so new bolts with custom spacers solved the problem. The Tecumseh salvaged from a snowblower is now running a Timberwolf conveyor!
I want to use two Tecumseh engines I have to drive hydraulic pumps. The Northern 3030 is the correct bolt pattern for both but is too short at 4", they also make the 3031 at 5" but no 6".
Searched online with no results so wondering if any of you know of a source for this adapter/mount?
No welding, used a heavy aluminum angle and a standard 2" steel receiver, some bolts and paint.
Frees up the larger tractors from pulling the splitter and a small trailer around my property.
[ATTACH=CONFIG]222[ATTACH=CONFIG]22254
Need full set of torque specs for this 9.5 hp side shaft - anyone have a shop manual with that info? The web is full of parts lists but no mechanical info.
Thanks,
OMT
New Exmark Navigator:
I hit a small 6" piece of a 2x4 which broke all 4 shear bolts. Ordered & received parts from my dealer along with an exploded view printout of the deck.
My question refers to the space between the blade driver/blade assy. and the blade retaining bolt/washer. Why is this...