Recent content by mountaincut

Give https://www.rcpw.com/ a try. They have helped me find several parts that were difficult to find. They seem to have a rather large network and have pulled from those sources to get me what I needed previouisly.

I have a Ferris Evolution that was giving me starter issues it ended up needing to have the safety switches adjusted, of which there are many. The two that I needed to adjust were the switch associated with the operators' seat and the switch on the emergency brake.

I have a Ferris Evolution that had, what I believe, was a similar problem, stepping back from full throttle while mowing. I searched every bit of visible linkage and could not find anything wrong. Even changed the springs at the engine throttle linkage. Eventually, after looking at what I...

Thanks for the suggestions but some time ago I ripped the control panel apart and found the actual problem. The connection at the main control throttle was not securely fastened. I put it in a vice and peened the connection making it secure. Problem solved!

I have this model mower and had a similar belt problem as well. The correct tension for the belt is determined by measuring the length of the tensionizer spring (not including the hook ends). The correct spring length should measure 7" - 71/4". I obtained this information from Ferris before...

I have a Ferris Evolution with a 48" deck powered by a Kawasaki 27 hp engine. I have owned this machine for three years and have overcome shredding deck belt issues during the first year and now have a problem that has me scratching my head. They tell you to run the engine at full throttle...