Hi ok i am accustomed to fixing all manner of machines but this has me pulling my hair out! Firstly as which seems standard on these machines after a season or so the pump diaphragm was shot.....pretty much hole punched out so changed that out with new gasket. But have noticed and to be fair its...
Hi stripped down the old engine to replace various gaskets and seals to get rid of the leaks but noticed one of the crankcase bolts ( if the engine is on its back pistons in the air pto side to you 3rd bolt from the bottom right hand side) is very oily. obviously this must be shared by an oil...
Hi, I have a 1987 MTD 137-667-611/F307H, its the typical transmatic with the variator pully. My issue is when I Clutch in and select the higher speeds the pully seems to struggle to return back unless you pull the clutch pedal back. Now, I have removed the belts and lubed everything up and all...
Hi what is the secret to removing the needle roller bearings in stihl hedge cutter gearboxes as fragile as they are they break up easy but you can never get the casing out! any sensible ideas?!
right apologies this has probably come up a million times but can't seem to find it. i know the ins and outs / procedure for setting the valve clearance the only bit that seems unclear is setting the fly wheel to tdc......which tdc are we dealing with as one the valves will have play and if the...