Hi all got a B&S 6.5 123332-0141-E1 horizontal crank engine fitted to an ATCO 20R cylinder mower.
Its having trouble starting, we have fitted a coil as there was no spark,there is now,replaced the plug and oil,still nothing.
It has a low oil level sensor fitted, but we have the oil at the...
Hi ive got two Honda GX25 4 stroke engines that have the same symptoms, wont start very well and when they do cut out after 2 mins.they will run on the choke but as soon as I move it to half choke it dies off.
Ive replaced the carb on one of them but no different, no adjusters anywhere but the...
This is what im looking at, ive got the timing marks right and the governor fitted correctly I think.
Can the governor be set with the sump off so I can see where ive set the arm to?
Hi all ive worked on a lot of different briggs motors but never had this much trouble with an engine.
Its a 17.5hp intek 31G777 motor fitted in a ride on mower. Ive replaced the con rod and cam shaft,
timed it up all ok like I normally do set the valves up but no start.
Its backfires through the...