Recent content by alloutdoors

Oh....

Sounds like a timing issue.

If I were storing a small engine that could reach that temperature, I would consider doing the following: Oil change Fog the engine, plenty of videos out there Store with a full tank of premium fuel with a stabilizer. Be sure to run the engine a while to ensure it's through the entire system...

Interesting he never mentioned where to set the outside gage wheels. I have always set them about 1/2" off the concrete when the deck is level. Thanks for sending the vido

It is a mechanical device, so things can go wrong. Thankfully it was under warranty! I would run it wide open and change the oil per the recommendation of the dealer.

When you have the belt engaged, is the belt "jumping/vibrating heavy"? Reason for asking, you may have a spring tension issue or a bad pully somewhere. It may be worth pulling the deck and closely examining everything for play

Dear All, I’m a long-time owner of equipment (all sorts) and for the life of me can’t seem to get a high quality cut out of my newish John Deere X390 with 48” deck. On flat ground, the machine is mowing reasonably well, but in turns, I’m noticing the discharge side scalping a bit and could use...