Results 1 to 5 of 5
  1. #1

    Join Date
    Sep 2012
    Posts
    4
    Location
    Arkansas
    Mower
    Cub Cadet

    Cub 2130 will not start.

    I have a Cub 2130, it is a 1999 model, it started and ran until I knocked off the interlock clutch swith, going up my shop concrete pad. I replaced the switch but the check oil light on the dash does not come on when trying to start it, (nothing dead), I checked the battery voltage at the battery and the starter and it is over 12v, I cleaned the PTO switch contacts and the ignition contacts, still nothing, the interlock for the seat has been disconnected and taped up, (it ran when I got it that way). Serial # 138-212F100 M/C C109G30033 is on the side plate. Any ideas on how to trouble shoot?

  2.  

  3. #2

    1,000 Post Club
    EngineMan's Avatar
    Join Date
    Jun 2012
    Posts
    1,593
    Location
    South Wales UK
    Mower
    No mowers

    Re: Cub 2130 will not start.

    Test the lamp to see if its alright by putting a meter on it, test the oil pressure switch to see if that is working.
    "Information/Knowledge not shared will be lost for ever, now that I'am over 60 I will give freely any information that will help you out, you don't have to take it, that is up to you...! the word "thank you" will not cost you anything, so be nice sometimes and use it now and then"

  4. #3

    Join Date
    Sep 2012
    Posts
    4
    Location
    Arkansas
    Mower
    Cub Cadet

    Re: Cub 2130 will not start.

    The lamp had been working, and the oil pressure light comes on at each start. The starter will not engage.

  5. #4

    1,000 Post Club
    EngineMan's Avatar
    Join Date
    Jun 2012
    Posts
    1,593
    Location
    South Wales UK
    Mower
    No mowers

    Re: Cub 2130 will not start.

    You say it was working..! have a look at it to make sure,
    Orange wire from key switch go's to PTO switch connection 2 to 1 orange wire into interlock switch out to solenoid, so check that path.
    You should have battery volts at (B) key switch on (S) key switch when in start, out on (1) on PTO switch (orange wire) on orange wire out of interlock switch, and on the small wire at the solenoid, so check them all.
    The above is the start path, and also make sure you have a good earth on the start solenoid.
    "Information/Knowledge not shared will be lost for ever, now that I'am over 60 I will give freely any information that will help you out, you don't have to take it, that is up to you...! the word "thank you" will not cost you anything, so be nice sometimes and use it now and then"

  6. #5

    Join Date
    Sep 2012
    Posts
    4
    Location
    Arkansas
    Mower
    Cub Cadet

    Re: Cub 2130 will not start.

    Thanks for the input EngineMan, I will let you know, how it comes out.

Similar Threads

  1. jump start cub cadet
    By Tadams32 in forum Small Engine & Mower Repair
    Replies: 4
    Last Post: 04-19-2012, 10:20 PM
  2. cub wont start
    By skeeter in forum Small Engine & Mower Repair
    Replies: 3
    Last Post: 02-07-2012, 11:30 AM
  3. cub cadet ags 2130
    By jrbaker90 in forum Cub Cadet Forum
    Replies: 7
    Last Post: 01-26-2012, 02:11 PM
  4. CubCadet AGS 2130 series 2000
    By yzinger in forum Cub Cadet Forum
    Replies: 1
    Last Post: 08-05-2011, 11:03 PM
  5. scag tigar cub won't start
    By UJONESN in forum Scag Forum
    Replies: 10
    Last Post: 04-16-2011, 06:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •