Results 1 to 3 of 3
  1. #1

    Join Date
    Oct 2011
    Posts
    29
    Location
    Texas
    Mower
    Craftsman

    Briggs 17.5 OHV Backfiring

    I have re-lapped the valves, I have replaced the spark plug & fuel filter, I have replaced the needle and bowl gasket & I have flushed out the gas tank and used Hi Octane fuel. My problem is that when I turn off the ignition key, there is a Pop / Backfire thru the muffler. I have connected the two wires that go to the fuel solenoid. Everything seems to be okay. It starts easy and runs good except when I turn the ignition key to the Off position is when the engine makes a Popping Noise.

    Any suggestions ?

    Please.

    Thanks.

  2.  

  3. #2
    pugaltitude's Avatar
    Join Date
    Jan 2012
    Posts
    922
    Location
    Scotland
    Mower
    Lots

    Re: Briggs 17.5 OHV Backfiring

    Sounds as though the antifire solenoid is not working.
    The backfire that you are hearing is fuel hitting the exhaust which is still getting sucked into the engine as the engine is slowing down and stopping.
    The solenoid is maybe stuck in the open position.

    You could also try putting throttle control to idle before switching off.
    The "best" engine you will ever own!

    Briggs & Stratton MST.

  4. #3
    scott47429's Avatar
    Join Date
    May 2012
    Posts
    646
    Location
    Indiana
    Mower
    Exmark

    Re: Briggs 17.5 OHV Backfiring

    i always idle mine down as low as it will go and let it idle for like 30 sec. then turn it off and it don't back fire if i don't it sounds like a shot gun going off

Similar Threads

  1. HELP..briggs & stratton popping or backfiring through the carburetor
    By vandredi in forum Briggs & Stratton Forum
    Replies: 26
    Last Post: 03-24-2014, 09:01 AM
  2. 11HP Briggs & Stratton backfiring through carby
    By shedboy54 in forum Briggs & Stratton Forum
    Replies: 14
    Last Post: 07-18-2013, 07:30 PM
  3. 15 hp ohv briggs will not start
    By phc in forum Briggs & Stratton Forum
    Replies: 5
    Last Post: 06-10-2012, 05:09 PM
  4. Briggs 18.5 intek backfiring, wont start
    By 97cummins in forum Briggs & Stratton Forum
    Replies: 1
    Last Post: 05-07-2012, 07:44 PM
  5. Briggs started backfiring, lost power and quit.
    By bfield3 in forum Briggs & Stratton Forum
    Replies: 4
    Last Post: 09-06-2011, 10:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •